Abus TVVR33602 - Mode: Group

37
9.5.4.2. Mode: Group
In this mode, the video data can be written specifically (also redundantly) to selected
data carriers. For this purpose, the data carriers are organised in "groups". A group
must contain at least one HDD.
Note: To make settings on the HDD group, click on "Edit" in the "Storage Device"
menu for the respective HDD.
9.5.5. Advanced settings
Here you can make general settings for all installed hard disks.
Record to HDD
Group
Select the HDD group
Camera
Select which cameras should record on the currently selected
group
Overwrite
Set whether older recordings should be overwritten when the
hard disk is full.
HDD sleep function
When this function is activated, hard disks that are idle go into
standby mode.
H.264 / H.265
DynGOP for all
analogue cameras
Activation of the H.264+ or H.265+ option for all analogue
channels to save bandwidth or storage space.
The DynGOP or "+" variant of compressing the video signal
is particularly effective if the picture content changes little
over time.