24
LIGHT AND VENTILATION PLACEMENT
There are many ways to configure these components to bring airflow into your grow space.
A typical setup places the fan and the filter inside, which makes it easier to manage while
dampening the fan noise. Both can be situated in any order within the ventilation chain if air is
being pulled out of your grow space.
For example, your grow lights might get in the way of your cooling equipment. In this case, you
may set the fan and/or filter outside of your grow tent.
We recommend setting your extraction fan at the highest point possible. Since heat rises to the
top, exhausting that hot air at that point will make the ventilation process efficient. Your carbon
filter will also perform better if it’s positioned at the highest point.
CONFIGURATION SETUP
CLOUDLAB
Fan Set
Outside The Tent
TENT POLES
You may use the tent poles’ length markers
(in feet) to help measure your plant’s height.
4
3
Fan and Filter Set
Outside The Tent
Pre-filter can
be placed
inside filter
Fan and Filter Set
Inside tent
To Next Page
Loading...
