7
Ensure your power source conforms to the electrical requirements of this product.
2.
Read all instructions before installing and using this product.
1.
Ducted products must always be vented to outdoor areas.
8.
Do not cover power cords with rugs or other fabric materials.
9.
Check your local code restrictions for additional safety measures that may be needed for a
proper code compliant installation.
3.
Do not attempt to hardwire this product. Performing any retrofitting actions may result in
personal injury and/or electrical damage, and will void this product’s warranty.
6.
This product must not be used in potentially hazardous locations such as flammable, explosive,
chemical-laden, or wet atmospheres.
7.
This product has rotating parts. Safety precautions should be exercised during the installation,
operation, and maintenance of this product.
10.
Do not depend on the on/off programming as the sole means of shutting power from this
product. Unplug the power cord before installing, servicing, or moving this product.
12.
Do not operate this product while it is damaged, or if it malfunctions, has been dropped, or its
cord is damaged in any manner.
13.
This product is not intended for users who lack experience with and knowledge of this
product, children, or those with reduced physical, sensory, or mental capabilities, unless
under supervision by a qualified individual responsible for their safety.
4.
If you are unfamiliar or have doubts about performing this product’s installation, seek the
services of a qualified, trained, and licensed professional. Inappropriate installation will void
this product’s warranty.
5.
Do not insert or allow fingers or foreign objects to enter any ventilation or exhaust openings as
it may cause electric shock, fire, or damage to this product. Do not block or tamper with this
product in any manner while it is in operation.
11.
PRODUCT WARNING
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO
PERSONS, OBSERVE THE FOLLOWING:
To Next Page
Loading...
