86
The CONTROLLER AI+ is built with eight ports that enable you to power and control
multiple devices at the same time (select products not included). See image below for a
sample configuration.
EXTENDING THE CHAIN
Plug the male end of the splitter* into your
UIS controller. Connect a UIS device or
power adapter to the first port of each tier to
power your controller and the hub.
Ports 2-4 can connect to additional splitters
or UIS devices. All devices plugged into this
chain must be of the same type (ex. grow
lights of any size) regardless of the length of
the dongle chain.
This splitter is not compatible with UIS
adapters such as the RJ11 Lighting Adapter.
ADDING MORE DEVICES
*Not included
CONTROLLER +
To Next Page
Loading...
