87
ADDING MORE DEVICES
DAISY-CHAINING
Each of the included controller’s ports can support up to 20 devices using a daisy-chain adapter
(not included). All devices must be from the same series but can be of differing sizes.
Plug the male end of the daisy-chain adapter into your device.
Connect your UIS controller to the daisy-chain adapter’s INPUT port using a M-M connector
cord. Using an extension cord, attach the daisy-chain adapter’s OUTPUT port to another
adapter’s INPUT port. You can also link the OUTPUT port to another UIS device to end the chain.
CONTROLLER +
To Next Page
Loading...
