AC Infinity AI-Powered Grow System COMPACT - Frequently Asked Questions

97
FREQUENTLY ASKED QUESTIONS
What devices are compatible with the CONTROLLER AI+?
All AC Infinity devices that contain a UIS connector are compatible. If your AC Infinity device
has a 4-pin Molex connector and an EC-Motor, it may still be compatible with the use of an
UIS adapter to convert its connector to fit with the controller.
Q:
A:
Where is the best place to position the sensor probe?
Place the sensor probe as close as possible to the hottest or most humid spot in your space.
Q:
A:
Do I need to remove the plastic cap from the probe?
Yes. You will need to remove the plastic cap so the probe can accurately read
climate conditions.
Q:
A:
Can I connect different sized fans to the same controller?
Please refer to the Adding More Devices section for details on adding more fan units.
Q:
A:
Will I be able to use this controller with my own devices?
CONTROLLER AI+ is only compatible with devices in the UIS platform. Look for our logo on
your AC Infinity device’s packaging for UIS compatibility.
Q:
A:
CONTROLLER +