Accent 1400 Hardware Manual for Dedicated Devices Page 36
Setting Up a Wi-Fi Connection
You can set up your device for a Wi-Fi connection. PRC is not responsible for the setup of your Wi-Fi
network. You must have access to a local Wi-Fi network. In the Accent, Wi-Fi is always turned on.
Note: If you have a dedicated device, a Wi-Fi connection will allow you to update your NuVoice software
via the Internet, but will not provide access to the Internet or an Internet browser.
1. Turn your device on.
2. Select the Tools key on the front of the device or select the Tools key to the right of the text display
area.
3. Select the Toolbox key from the Tools menu.
4. Select Maint Menu from the Toolbox.
5. Select Hardware Diagnostics.
6. Select Network Setup.
7. From the Network screen, select the Connect or disconnect link.
You will see a list of available networks to connect to and their signal strength. If you are at home,
your home network should be visible. If you are at school or work, you will probably see more
networks to choose from.
8. Select the network you want to connect to.
9. Select Connect.
10. Follow the directions on your display. You may need to enter a network key or password.
11. When you are connected, the Wi-Fi icon in the task bar changes to bright white.
To Next Page
Loading...
