Access Interfacing Solutions LSR110 - Maintenance; Cleaning and Storage

To Next Page

To Previous Page

Table 1. Troubleshoot the LSR116

Problem

Solution

LSR116 not transmitting data to

host

Check that all cable connections between the LSR116 and

host are secure.

Ensure that the unit has power.

LSR116 cannot scan barcode

Ensure that the unit is configured to read the barcode that

you are scanning.

If scanning a document, ensure that the print quality is

good.

If scanning a barcode on a mobile phone, ensure that you

set the screen backlight on the phone to its brightest

setting.

3.10 Maintenance

3.10.1 Cleaning

Clean the glass with a lint-free cloth. If the glass is dirty, wipe the glass with a lint-free cloth

moistened with isopropyl alcohol or use an alcohol wipe. Do not use abrasive cleaners.

3.10.2 Storage

Store the unit in its original box, at a temperature of -30ºC to 70ºC.