Access Interfacing Solutions LSR110

Michael PayneAug 4, 2025

What to do if Access Interfacing Solutions LSR110 Barcode Reader LSR116 cannot scan barcode?

S
Sara KnoxAug 4, 2025
If your Access Interfacing Solutions Barcode Reader LSR116 cannot scan a barcode, make sure that it is configured to read the barcode type you are attempting to scan. Additionally, if you are scanning a document, verify that the print quality is satisfactory. If scanning a barcode on a mobile phone, set the screen backlight on the phone to its brightest setting.

Summary

Technical Specifications

Part Numbers and Accessories

Lists the available part numbers for the LSR116 device and associated accessories like cables and power supplies.

Installation: Unpacking and Connection

LSR116 Unpacking Guide

Details the items included in the LSR116 package and instructions for checking them for completeness and damage.

Connection Methods

Explains how to connect the LSR116 to a host PC via RS232 or USB ports, noting cable sealing.

Installation: Mounting and Interfaces

Mounting Guidelines

Provides dimensions and mounting points for installing the LSR116 into kiosks or gates, with considerations for performance.

Interface Options Explained

Describes the different connection interfaces available: Serial (RS232), USB Keyboard, CDC, and HID POS.

Installation: Serial and USB Procedures

Serial Connection Setup

Provides detailed steps for installing the LSR116 using a serial connection, including power requirements.

USB Connection Setup

Provides detailed steps for installing the LSR116 via USB connections, covering driverless keyboard, CDC, and HID modes.

Installation: Testing, Configuration & Troubleshooting

Testing the Device

Instructions on how to verify the LSR116 is functioning correctly after installation by waving media in front of it.

Configuration Software

Information on accessing and using the LSR116 configuration tool or terminal emulation programs.

Troubleshooting Common Issues

Guidance for resolving common issues encountered with the LSR116, with contact information for support.

Maintenance

Cleaning and Storage

Covers recommended cleaning procedures for the device glass and storage temperature guidelines.

Operating Modes

Mode Summary

Provides an overview of the three operating modes: Dumb, Host, and Interactive, and how they are configured.

Dumb Mode Details

Explains Dumb mode functionality, process flow, and provides an example of its operation.

Host Mode Details

Explains Host mode functionality, process flow, and provides examples for accept, reject, and ignore commands.

Interactive Mode Details

Explains Interactive mode functionality, process flow, and provides examples for trigger controls and host interaction.

Command Reference

Basic Configuration Commands

Details commands for setting device interface, connection parameters (baud rate, parity), and operating mode.

Prefix and Suffix Solutions

Explains commands for adding prefixes and suffixes to barcode data, including clearing existing ones.

Illumination Control

Details commands for controlling the device's illumination LEDs, including adaptive modes and timing.

Indicator Control

Details commands for controlling the 'Good Read' and 'Bad Read' indicator LEDs, including duration and timing.

Development Commands

Details commands for firmware management, imager status checks, and barcode reading enable/disable.

Status LED Commands

Details commands for configuring the status LEDs on the main circuit board for diagnostic purposes.

Triggering Commands

Details commands for controlling the automatic untrigger, trigger timeouts, and presentation modes.

Counter Commands

Details commands for displaying the count of 'Good Read' and 'Bad Read' events.

HID Reports and Commands

Receive Data Structure

Explains the structure of HID input reports for data received from the LSR116, including symbology identifiers.

Send Command Structure

Explains the structure of HID output reports for sending commands to the LSR116, with examples.

Trigger Controls via HID

Details how to use HID output reports to control device status, activate 'read' lights, and trigger/untrigger.