122
Acoustic Mode
Farbe: P 249 – Prüfmittelnummer: 203
6.1 Beep tones at power-on
When Acoustic Mode is set to on, you hear a long beep ( — ) when you
turn on the meter.
This is irrespective of which button you use to turn the meter on:
the Test button in order to perform a test (see Chapter 4.3.1)
the S button in order to change settings (see Chapter 3)
the M button in order to retrieve results from memory (see
Chapter 5)
the M and S button in order to send results (see Chapter 5.4)
If you press the Test button or M button to turn the meter on, you first
hear the long power-on beep followed by 6 further beeps spaced as
1 – 2 – 3 ( – – – – – – ).
man_06919570001_01_EnCan.indd 122 18.01.2013 18:38:44
To Next Page
Loading...
Need help?
General
