111
Using the meter as an electronic notebook
5
You can exit from the average value display at any time:
To do this, press the Test button.
The meter turns off.
Notes
i
Results flagged as control tests with the bottle symbol are not
included in the calculations.
i
Results shown as being or are not included in the average
calculations, but are displayed as the lowest and highest values,
respectively.
i
The meter calculates the average value, the lowest value and the
highest value for a period even when the saved results cover a
shorter period. Example: tests were only performed in the last 5
days. In addition, either no other results were saved or the results
that were saved are more than 30 days old. Consequently the
results for the last 5 days are used for calculating the average,
the lowest value and the highest value for all three periods (7, 14
and 30 days).
man_06919570001_01_EnCan.indd 111 18.01.2013 18:38:41
To Next Page
Loading...
