126
Acoustic Mode
Farbe: P 249 – Prüfmittelnummer: 203
Note
i
Information or warnings in the form of symbols (e.g. drum symbol
or
symbol, see Chapter 12.1) that are displayed together
with the result are not announced acoustically.
6.4 Announcement of results and average values from memory
Only the last (most recent) result that was saved can be announced
acoustically.
If you press the M button to turn the meter on, you first hear the long
power-on beep followed by the beep sequence 1 – 2 – 3 and then the
most recent result.
Only the average for the last 7 days is announced acoustically. The
lowest and highest results within this period are not announced
acoustically.
The announcement follows the same pattern as any result that is
announced directly following a test.
man_06919570001_01_EnCan.indd 126 18.01.2013 18:38:45
To Next Page
Loading...
Need help?
General
