155
Blood glucose testing in a multi-patient setting
10
Correct
Blood drop approx. 1.5 µL
Hold the meter with the test strip pointing downwards (see
illustration).
Immediately after the blood drop has formed: Hold the tip of the test
strip against the blood drop so the black notch is touching the blood
drop. The test strip draws up blood.
Move the test strip away from the blood drop as soon as the
hourglass symbol
is displayed and the meter beeps (only when
the beep tone is turned on). The test strip has then drawn up enough
blood, and the test starts.
When the result is displayed, hold the meter upright over a waste
bin and press the Test button to turn it off. The used test strip drops
out.
man_06919570001_01_EnCan.indd 155 18.01.2013 18:38:55
To Next Page
Loading...
