39
Settings
3
When you turn the meter on for the first time, it has the following
presettings. These are factory defaults that you can change.
Beep tone: on, Acoustic Mode: off
Brightness of the display: medium
Year: current year, e.g. 2007
Time-and-date format: 12-hour or 24-hour format;
12-hour format is associated with the date format month-day
(MM-DD)
24-hour format is associated with the date format day-month
(DD-MM)
Time: current time based on Eastern Standard Time (EST)
Date: current date based on Eastern Standard Time (EST)
Alarm clock function: off
Hypo indicator: off
Notes
i
If the year, time and date settings were lost as a result of a
battery replacement (see Chapter 9) and you fail to reset these,
the meter displays the time as 0:00 and the date as 0-00 (in
24-hour format as well as in 12-hour format) when you perform
a test.
In memory the results are saved not with the time and date but
man_06919570001_01_EnCan.indd 39 18.01.2013 18:38:05
To Next Page
Loading...
