62
Settings
Farbe: P 249 – Prüfmittelnummer: 203
Setting alarm times
The procedure for setting the alarm time is the same for each alarm.
Alarm 1 is used below for illustrative purposes. The number
1
and
subsequently
2
and
3
in the display stand for Alarms 1, 2 and 3.
The factory setting is 0:00 (24-hour format) or 12:00 am (12-hour
format). This time means that alarm 1 is turned off. Only when you set a
different alarm time is Alarm 1 turned on.
First the hour is set, and then the minutes.
The hour flashes at top left of the display.
24-hour
format
12-hour
format
man_06919570001_01_EnCan.indd 62 18.01.2013 18:38:15
To Next Page
Loading...
Need help?
General
