Accu-Chek GO - Page 32

• Press and at the same time to display the 7-day average.
• Press and at the same time to display
the 14-day average. By repeating this step, you
can scroll through the 7-, 14-, and 30-day
averages.
• Press to exit from the "average" screen and return to normal
memory mode, showing the last result retrieved.
• Press to turn off the meter.
NOTE: When averages are being calculated, all results flagged as control readings are ignored.
NOTE: If more than 30 seconds have elapsed since the last button was pressed, the meter turns itself off to
preserve battery life.
M
S
S
M
S
M
Chapter 4: Using the Meter’s Memory 30 ACCU-CHEK Customer Care Service Center 1-800-440-3638
Example