Screen Messages and Troubleshooting
This message appears... and means:
mem
• in Memory Mode • This is a value saved in memory.
code
• after the display test in association • Check the code number
with the code number
• (flashing) after the display test • The code key is missing
mg/dL
• during the display test • This is a pre-programmed unit used to state the
blood glucose result.
• while the result is displayed (Test and Memory)
*
• during testing • This is a result flag used to signify a user-defined
event.
• alongside results in memory
Chapter 5: Maintenance and Troubleshooting 37 ACCU-CHEK Customer Care Service Center 1-800-440-3638
To Next Page
Loading...
Need help?
General
