Accu-Chek Nano - Page 47

45
Here is how to mark a test result and initiate a post‑meal test reminder:
1. Perform a test. Do not remove the test strip.
2. Press and release
to toggle through the test result markers and post‑meal test reminder.
Pre-Meal Marker
Pre-Meal Marker with Post-Meal Test Reminder
Post-Meal Marker
General Marker
3. When the test result marker (
, , or ) or pre‑meal marker with post‑meal test reminder ( ) that
you wish to select appears on the display, remove the test strip from the meter.
• If you select the post‑meal test reminder, the meter beeps 1 or 2 hours after the pre‑meal test to
remind you to do a post‑meal test.
• If you select a test result marker, it is automatically stored in memory.
NOTE
The post‑meal marker automatically appears with the test result if a test is performed
15 minutes before or after the post‑meal test reminder is programmed to beep. Set the
post‑meal test reminder time to 1 or 2 hours in the set‑up mode.