Accu-Chek Nano User Manual

69
To clean and disinfect without damaging the meter, follow these procedures carefully.
When to Clean and Disinfect the Meter
• Clean the meter to remove visible dirt or other material prior to disinfecting.
• Clean and disinfect the meter at least once per week and when blood is present on the surface of the
meter.
• Clean and disinfect the meter before allowing anyone else to handle the meter. Do not allow anyone else
to use the meter on themselves for testing purposes.
Approved Cleaning and Disinfecting Product
The following product has been approved for cleaning and disinfecting the meter:
• Super Sani‑Cloth (EPA* reg. no. 9480‑4)
*Environmental Protection Agency
Super Sani‑Cloth can be purchased from the following sources:
• Amazon.com
• Ocedepot.com
• Walmart.com
Cleaning and Disinfecting the Meter

Accu-Chek Nano Specifications

General

Display Type	LCD
Sample Size	0.6 µL
Test Time	5 seconds
Memory Capacity	500 results
Automatic Power Off	Yes
Memory	500 results
Dimensions	69 x 43 x 20 mm
Weight	40 g with batteries
Measuring Range	0.6 - 33.3 mmol/L
Operating Conditions	10 - 90% relative humidity