61
5. If On is selected, the hour
flashes. A-1 and the bell
symbol remain on the display.
6. Press and release
or to
select the hour. Press and
release
to set the hour.
7. The minutes flash. Press and
release
or to select 00,
15, 30, or 45. These are the
only choices.
8. Press and release
to set the
minutes. Am or pm flashes on
the display. Press and release
or to switch between
am and pm. Press and release
to set am or pm.
9. Set-up, OFF, and the bell
symbol appear on the display
with the next test reminder
(A-2) flashing. You can either
set a second test reminder or
press and hold
until the
flashing test strip symbol
appears to exit.
NOTE
When you are setting the time for the test reminders, the bell symbol and set-up remain on the display.