72
1. Wash hands thoroughly with
soap and water.
2. Turn o the meter and wipe
the entire meter surface with
an approved cleaning and
disinfecting product. Always
use the same product for both
cleaning and disinfecting.
3. Carefully wipe around the test
strip slot and other openings.
Make sure that no liquid
enters any slot or opening.
WARNING
The eect of using more than one product interchangeably to clean and disinfect the meter has
not been tested. Always use Super Sani-Cloth (EPA reg. no. 9480-4) to clean and disinfect the
meter. Do not use any other cleaning or disinfecting solutions. Using solutions other than the
Super Sani-Cloth could result in damage to the meter.
To Next Page
Loading...
