Accu-Chek Nano User Manual

88
Protection class III
Meter type The ACCU‑CHEK Nano meter is suitable for continuous operation.
Control solution storage conditions Refer to the control solution package insert.
Electromagnetic Compatibility
This meter meets the electromagnetic immunity requirements as per ISO 15197 Annex A. The chosen basis
for electrostatic discharge immunity testing was basic standard IEC 61000‑4‑2. In addition, it meets the
electromagnetic emissions requirements as per EN 61326. Its electromagnetic emission is thus low. Interference
from the meter to other electrically‑driven equipment is not anticipated.
Performance Analysis
Refer to the test strip package insert.
Test Principle
Refer to the test strip package insert.

Accu-Chek Nano Specifications

General

Display Type	LCD
Sample Size	0.6 µL
Test Time	5 seconds
Memory Capacity	500 results
Automatic Power Off	Yes
Memory	500 results
Dimensions	69 x 43 x 20 mm
Weight	40 g with batteries
Measuring Range	0.6 - 33.3 mmol/L
Operating Conditions	10 - 90% relative humidity