7. Touch the blood drop to the front edge
of the yellow window of the test strip.
When you see
flash, you have
enough blood in the test strip.
8. The result appears on the display. Mark
the result, or remove and discard the
used test strip.
Note: If the blood drop is too small, reapply pressure to get a sufficient blood drop.
23
OROR
43149_NanoPerf_24MSTR_Ins.indd 2343149_NanoPerf_24MSTR_Ins.indd 23 11/25/08 2:49:02 PM11/25/08 2:49:02 PM
To Next Page
Loading...
