Accu-Chek Performa Nano User Manual

Troubleshooting Checks
1. Check if the test strips were expired.
2. Check if the cap on the test strip
container was always closed tightly.
3. Check if the test strip was out of the
container for a long time.
4. Check if the test strips were stored in a
cool, dry place.
Action
Discard the test strips if they are past the
expiry date.
Replace the test strips if you think they
were uncapped for some time.
Repeat the test with a new test strip.
Repeat the test with a properly stored test
strip.
Unusual Test Results
If your blood glucose result does not match how you feel, follow these steps:
24
43149_NanoPerf_24MSTR_Ins.indd 2443149_NanoPerf_24MSTR_Ins.indd 24 11/25/08 2:49:02 PM11/25/08 2:49:02 PM

Accu-Chek Performa Nano Specifications

General

Sample Size	0.6 µL
Test Time	5 seconds
Battery Life	Approximately 1000 tests
Dimensions	69 x 43 x 20 mm
Display	LCD
Memory Capacity	500 results
Automatic Power Off	90 seconds
Battery	1 x 3V lithium battery (CR2032)
Test Strip	Accu-Chek Performa
Data Transfer	Infrared (IR)
Storage Conditions	-25°C to +70°C
Measurement Range	0.6 - 33.3 mmol/L
Weight	Approx. 40 g (with battery)
Operating Conditions	6°C to 44°C, 10% to 90% RH