Accu-Chek Performa Nano - Page 56

3. Select the control
solution you want to
test. You will enter the
level later in the test.
4. Put the meter on a flat
surface, like a table.
5. Remove the control
bottle cap. Wipe the tip
of the bottle with a
tissue.
54
OR
43149_NanoPerf_24MSTR_Ins.indd 5443149_NanoPerf_24MSTR_Ins.indd 54 11/25/08 2:49:07 PM11/25/08 2:49:07 PM