Dimensions 69 x 43 x 20 mm (LWH)
Weight Approx. 40 g (with batteries)
Construction Hand-held
Protection class III
Meter type The Accu-Chek Performa Nano Meter is suitable for
continuous operation
Control solution storage conditions 2 ºC to 32 ºC
Electromagnetic Compatibility
This meter meets the electromagnetic immunity requirements as per ISO 15197
Annex A. The chosen basis for electrostatic discharge immunity testing was basic
standard IEC 61000-4-2. In addition, it meets the electromagnetic emissions
requirements as per EN 61326. Its electromagnetic emission is thus low. Interference
from other electrically driven equipment is not to be anticipated.
74
43149_NanoPerf_24MSTR_Ins.indd 7443149_NanoPerf_24MSTR_Ins.indd 74 11/25/08 2:49:10 PM11/25/08 2:49:10 PM
To Next Page
Loading...
