Accu-Chek Performa User Manual

22
Meter Memory, Setup, and Data Transfer
3
Press and release to
turn the meter on.
The flashing test strip
symbol appears on the
display.
Press and hold
until
set-up appears on the
display.
1
Press and release
repeatedly until set-up
and the flashing 1Hr or
2Hr appear on the
display.
2
Press and release or
to select 1Hr or 2Hr.
Press and release
to
set the option.
To set up more options,
press and release
.
To exit, press and hold
until the flashing test strip
symbol appears on the
display.
3
This display appears
when a post-meal test
reminder occurs.
The post-meal test reminder:
• beeps 1 or 2hours after the blood glucose test to
remind you to do a post-meal test.
• beeps every 2minutes up to 3times.
• turns o by inserting a test strip or pressing any
button.
• If a test was performed within 15minutes of a test
reminder, the test reminder does not beep.
• If the meter is on at the test reminder time, the
test reminder does not beep.
• Exposure to cold conditions may disable test
reminders until the meter is turned on.
Setup
Setting the Post-Meal Test Reminder
NOTE
51746_07022590001.indb 22 7/11/13 1:27 PM

Accu-Chek Performa Specifications

General

Sample Size	0.6 µL
Test Time	5 seconds
Meter Dimensions	94 x 52 x 21 mm
Measurement Range	0.6-33.3 mmol/L
Memory Capacity	500 results
Battery Type	1 x CR2032 lithium coin cell
Automatic Power Off	90 seconds after last user action
Operating Humidity	10 to 90% RH
Storage Conditions	10% to 90% RH
Meter Weight	59 g (with battery)