Accu-Chek Performa User Manual

25
Meter Memory, Setup, and Data Transfer
3
Press and release to
turn the meter on.
The flashing test strip
symbol appears on the
display.
Press and hold
until
set-up appears on the
display.
1
Press and release
repeatedly until set-up,
OFF, and the flashing
appear on the display.
2
or
3
Press and release or
to adjust the level.
Press and release
to
set the level.
To exit, press and hold
until the flashing test strip
symbol appears on the
display.
The set-up mode is
complete.
4
Setup
Setting the Hypoglycaemic Alert
wWARNING
• This function is no substitute for hypoglycaemia training by your healthcare professional.
• Consumer: Before you set the hypoglycaemic alert, talk to your healthcare professional to help you
decide what blood glucose level is your hypoglycaemic level.
• Healthcare professionals: The hypoglycaemic level may vary from person to person. It is
recommended to turn the hypoglycaemic alert OFF when using the meter in a professional setting.
Press and release or
to switch between On
and OFF.
Press and release
to
set your choice.
If you select On, set-up
appears and
flashes.
or
51746_07022590001.indb 25 7/11/13 1:27 PM

Accu-Chek Performa Specifications

General

Sample Size	0.6 µL
Test Time	5 seconds
Meter Dimensions	94 x 52 x 21 mm
Measurement Range	0.6-33.3 mmol/L
Memory Capacity	500 results
Battery Type	1 x CR2032 lithium coin cell
Automatic Power Off	90 seconds after last user action
Operating Humidity	10 to 90% RH
Storage Conditions	10% to 90% RH
Meter Weight	59 g (with battery)