3.5 Ultraviolet and Magnetic Detection Functions
(Available for the model AB-1100 MG/UV only)
The MG detection function is selected or deselected by pressing the MG button
on the control panel. The Magnetic function is able to check all types of ban-
knotes that use magnetic ink on its printing process.
Operation
MG function is automatically turned on when the unit is powered up. If the unit
detects a suspicious bill, it will stop counting and will emit a warning sound
meanwhile the display will show the message “MG ALARM”, alerting the user of
the presence of a suspicious bill.
The problematic bill will be the last one on the stacker.
The warning message and the alarm will remain until the bills on the
hopper have been removed.
To adjust the sensitivity of the MG function, press the MG button for 3 seconds.
The display will show the current sensitivity level (MG-X). Using the
“+” or “-” buttons, choose the desired sensitivity level. To set up the desired
sensitivity level from 0-9.
To set the desired sensitivity level, press RESTART
21
3.0 Operations cont.
To Next Page
Loading...
