3.4 Ultraviolet Detection Function
(Available for the models AB-1100 UV and/or AB-1100 MG/UV, only)
UV detection function is selected or deselected by pressing the UV button on the
Control Panel. The UV function is able to check all types of banknotes containing
UV features and alert the user in case it fails.
Operation
The UV function is automatically turned ON when the unit is powered up. If the
unit detects a suspicious bill, it will stop counting and will emit a warning sound
meanwhile the display shows the message “UV ALARM”, alerting the user of the
presence of a suspicious bill.
The problematic bill will be the last one on the stacker.
The warning message and the alarm will remain until the bills on the
hopper have been removed.
To adjust the sensitivity of the UV function, press the UV button for 3 seconds.
The display will show the current sensitivity level (UV-X). Using the “+” or “-” but-
tons, choose the desired sensitivity level from 0-9.
To set the desired sensitivity level, press RESTART.
Note: The ultraviolet function will work at its best performance ve minutes after
the machine has been turned on.
20
3.0 Operations cont.
To Next Page
Loading...
