AccuBANKER AB-1100 Plus Basic - 5 Maintenance; Verifying the Adjustment of the Hopper Plate

5.1 Verifying the Adjustment of the Hopper Plate
The hopper plate ensures proper feeding of the bills for counting. It is secured to
the back of the unit by two pivoting points and a magnetic lock. To verify that the
Hopper Plate is properly adjusted, press or lift the hopper plate and look for any
displacement (see gure 1). If any displacement occurs, press or lift the hopper
plate until the magnetic lock holds the piece in place.
5.0 Maintenance
27
Figure 1