3.6 “ADD” Function
Addition will be performed by pressing the “ADD” button. In this case, the unit will
add all the counting performed with this function ON. Removing the counted bills
from the stacker will not clear the previous quantity already counted. The total
amount will be shown on the display every time a bundle of bills is counted.
Pressing the “Restart” button the user will clear the counting from the display’s
main section.
3.7 “WIDTH” Detection Function
This feature will allow you to detect bills shorter than the rst one counted by
the unit. Press down the “Batch” button for 3 sec to activate it, the current level
adjustment will come out on the display (DD-X). The function can be adjusted in
the range of 0-9 using the + and – keys.
DD-0 means the function is disabled.
NOTE: The ultraviolet and magnetic detection systems integrated in the AB-1100
(models UV and MG/UV only,) are valuable instruments that help the user verify the
legitimacy of bills. However, the AB-1100 (models UV and MG/UV only,) like all other
counters with integrated detectors found in the market, cannot guarantee the legiti-
macy of any bill analyzed by it due to the unpredictable techniques or advances that
counterfeiters may introduce.
22
3.0 Operations cont.
To Next Page
Loading...
