Table of Contents
3.3 Counting Function 18
3.4 UV Detection Function 20
3.5 MG / UV Detection Function 21
3.6 “ADD” Function 22
3.7 “WIDTH” Detection Function 22
3.8 Bill Density Detection Function 23
3.9 “BATCH” Function 23
3.10 Emergency Stop Feature 24
4.0 TROUBLESHOOTING 25
4.1 Avoiding Problems 25
4.2 Jamming 25
4.3 Counting is Wrong (Miscounting) 26
4.4 Additional Recommendation 26
5.0 MAINTENANCE 27
5.1 Verifying the Adjustment of the Hopper Plate 27
5.2 Flipping the Rubber Tongue 28
6.0 ERROR MESSAGES 30
7.0 SPECIFICATIONS 31
4
To Next Page
Loading...
