Accurate Logic Pulse Series User Manual

35
Sending a RemoteCall
If the operator notices trouble on the line that a sensor is
monitoring, they can send an emergency email to the address that
was setup in the RemoteCall Email Configuration Screen. This
email will be sent immediately and notify the recipient of which
sensor is having a problem.
To send a RemoteCall, the operator just needs to press and hold the
button for the line that is having problems. When the button starts
to blink red, the user can release the button.

Accurate Logic Pulse Series Specifications

General

Brand	Accurate Logic
Model	Pulse Series
Category	Measuring Instruments
Language	English