10
Advanced Sensor Setup
Each Sensor can be custom configured to fit the product that it is
counting. Most of the time this won’t be needed, but some
products may need some fine tuning. Press the button
on the Configure Sensors Screen to access the Advanced Sensor
Setup.
For example, suppose you are measuring a box of cereal. If you
have the “Type” field set to “Normally Closed”, the “On” field
will be how long the box of cereal will be in front of the sensor
(x100ms), and the “Off” field will be the usual length of time
before another box of cereal will meet the sensor. However, if you
have the “Type” field set to “Normally Open”, the “Off” field will
be how long the box of cereal will be in front of the sensor
To Next Page
Loading...
Need help?
General