WinCEGeräte_Handbuch_Administration_v2 00_en 31 / 84
2.4.4.1 Exiting the configuration and program
To display the ExtScan2KeyCE configuration tool, proceed as follows:
Tap the bottom of the display. The status bar (with battery
icon and clock) is hidden by the task bar.
Double-tap the barcode icon in the task bar to launch the
configuration tool.
(This barcode icon is more easily recognisable than the
ScanDrv icon.)
There are two ways to exit ExtScan2keyCE:
• Enter the password 2801 in the first tag of the configuration dialogue box.
• Select Start / Programs / ACD / System / Close ExtScan2KeyCE.
To Next Page
Loading...
