Acer Aspire 1610 series - Removing the LCD Brackets; Removing the LCD Coaxial Cable

57 Aspire 1610
Removing the LCD Brackets
1. See “Removing the Battery” on page 48.
2. See “Removing the Middle Cover” on page 52.
3. See “Removing the Launch Board” on page 52.
4. See “Removing the LCD Module” on page 53.
5. See “Removing the LCD Bezel” on page 55.
6. See “Removing the Inverter Board (15” LCD)” on page 55.
7. See “Removing the 15” TFT LCD” on page 56.
8. Remove the four screws holding the right LCD bracket.Then remove the right bracket.
9. Remove the four screws holding the left LCD bracket. Then remove the left bracket..
Removing the LCD Coaxial Cable
1. See “Removing the Battery” on page 48.
2. See “Removing the Middle Cover” on page 52.
3. See “Removing the Launch Board” on page 52.
4. See “Removing the LCD Module” on page 53.
5. See “Removing the LCD Bezel” on page 55.
6. See “Removing the Inverter Board (15” LCD)” on page 55.
7. See “Removing the 15” TFT LCD” on page 56.
8. Tear off the mylar fastening the LCD coaxial cable, then disconnect the coaxial cable.