Acer Aspire 1610 series - Frequently Asked Questions

Chapter 3 64
3. Remove another two screws holding the FDD bracket on the other side. Then take the FDD off the FDD
bracket.
Removing the VGA Heatsink Plate
1. See “Removing the Battery” on page 48.
2. See “Removing the Middle Cover” on page 52.
3. See “Removing the Keyboard” on page 59.
4. See “Removing the Floppy Disk Drive Module” on page 63.
5. Remove the three screws that secure the VGA heatsink plate then remove the plate.
Removing the CPU Heatsink Plate
1. See “Removing the Battery” on page 48.
2. See “Removing the Middle Cover” on page 52.
3. See “Removing the Keyboard” on page 59.
4. See “Removing the Floppy Disk Drive Module” on page 63.
5. Remove the screw that fastens the CPU heatsink plate then remove it.