Machine Maintenance 3-69
4. Tighten the five (5) spring-loaded captive screws to secure thermal module in place.
Follow the sequence of the number beside each screw when securing the thermal
module.
5. Tighten the spring-loaded captive screws to secure the thermal module. Follow the screw
sequence indicated on Figure 3-101.
Figure 3-101. Thermal Module Screws
6. Connect the fan cable to the mainboard.
Figure 3-102. Fan Cable
Table 3-26. Screws
Step Screw Quantity Screw Type
Thermal Module Disassembly – 5 –
To Next Page
Loading...
