Machine Maintenance 3-11
Removing the ODD Module 0
1. Perform the “Removing the Battery Pack” procedure described on page 3-9.
2. Remove the screw securing the ODD module.
Figure 3-5. ODD Module Screw
3. Slowly pull out the ODD module from the ODD drive bay.
Figure 3-6. ODD Module
4. Remove the screw securing the ODD bracket.
Table 3-3. Screw
Step Screw Quantity Screw Type
ODD Module Disassembly M2.5 × L6 1
To Next Page
Loading...
