Machine Maintenance 3-13
Removing the Base Door 0
1. Perform the “Removing the Battery Pack” procedure described on page 3-9.
2. Remove the screws securing the base door.
Figure 3-10. Base Door Screws
3. Insert a non-marring plastic scribe on the base door’s notch to release the base door (a),
and then remove the door from the computer (b).
Figure 3-11. Base Door
Table 3-5. Screws
Step Screw Quantity Screw Type
Base Door Disassembly M2.5 × L6 3
To Next Page
Loading...
