Machine Maintenance 3-23
Removing the Palmrest Module/Upper Cover 0
1. Perform the “Removing the HDD Module” and “Removing the ODD Module” procedures
described on pages 3-14 and 3-11 respectively.
2. Perform the “Removing the Keyboard” procedure described on the preceding section.
3. Remove the base side screws securing the upper cover.
Figure 3-25. Upper Cover Screws – Base Side
4. Turn the computer over and open the LCD panel.
5. Remove the single top side screw securing the upper cover.
Table 3-11. Screw
Step Screw Quantity Screw Type
Upper Cover Disassembly M2 × L3 3 (#10-12)
M2.5 × L6 9 (#1-9)
To Next Page
Loading...
