3-14 Machine Maintenance
Removing the HDD Module 0
1. Perform the “Removing the Base Door” procedure described on page 3-13.
2. Remove the HDD screw.
Figure 3-12. HDD Module Screw
3. Lift the tab and use it to disengage the HDD from its connector and then remove the HDD
assembly from its compartment.
Figure 3-13. HDD Module
Table 3-6. Screw
Step Screw Quantity Screw Type
HDD Module Disassembly M2 x L3 1
To Next Page
Loading...
