Machine Maintenance Procedures 3-17
3. Remove screw (D) from lower cover (Figure 3-13)
Figure 3-13. USB screw
4. Remove USB module from lower case.
USB Module Installation 0
1. Install USB module on lower cover.
2. Install and secure screw (D) to lower cover (Figure 3-13).
3. Connect USB module FFC (A) to module connector (B) (Figure 3-12).
4. Connect USB module FFC (A) to mainboard connector (C) (Figure 3-12).
5. Install the base cover.
ID Size Quantity Screw Type
D M2.5*3.5 1
To Next Page
Loading...
