3-50 Machine Maintenance Procedures
LCD Hinge Removal 0
Prerequisite:
LCD Panel Removal
1. Remove the three (3) screws on each side of the hinge (Figure 3-49).
Figure 3-49. LCD Hinges
2. Remove LCD hinges from the LCD module.
LCD Hinge Installation 0
1. Place the LCD hinges on the LCD module (Figure 3-49).
2. Install and secure the six (6) screws to the LCD hinges (Figure 3-49).
3. Install the LCD panel.
ID
Size Quantity Screw Type
Red
Call
out
M2.5*4.0 6
To Next Page
Loading...
