2-4 System Utilities
BIOS 0
The following is a description of the tabs found on the InsydeH20 BIOS Setup Utility
screen:
The screens provided are for reference only. Actual values may differ by model.
Information 0
The Information tab shows a summary of computer hardware information.
Figure 2-1. BIOS Information
Table 2-1 describes the parameters shown in Figure 2-1
Table 2-1. BIOS Information
Parameter Description
CPU Type CPU (central processing unit) type and speed of system
CPU Speed Speed of the CPU
HDD Model Name Model name of HDD (hard disk drive) installed on primary IDE
master
HDD Serial Number Serial number of HDD installed on primary IDE master
ATAPI Model Name Model name of ATAPI (Advanced Technology Attachment with
Packet Interface)
System BIOS Version System BIOS version
VGA BIOS Version VGA (video graphics array) firmware version of system
To Next Page
Loading...
