3-8 Machine Maintenance Procedures
Battery Pack Removal 0
1. Place computer on flat surface, battery side up.
2. Push battery lock/unlock latch (A) to unlock position (Figure 3-3).
3. Push and hold battery release latch (B) to release position (Figure 3-3).
4. Lift battery pack (C) from battery bay (Figure 3-3).
Figure 3-3. Battery
Follow local regulations for battery (C) disposal (Figure 3-3).
Battery Pack Installation 0
1. Hold latch (B) in release position and install battery (C) (Figure 3-3).
2. Lock battery lock/unlock latch (A) (Figure 3-3).
To Next Page
Loading...
