Machine Maintenance Procedures 3-23
Figure 3-21. WLAN Module
WLAN Module Installation 0
1. Place the WLAN module into the mainboard connector (E). Refer to Figure 3-21.
2. Secure the antennas to the cable guides on the thermal module. Refer to Figure 3-20.
3. Install and secure one (1) screw (C) to mainboard. Refer to Figure 3-19.
4. Install the antenna cables on WLAN module. Refer to Figure 3-18.
5. Install the base cover.
ID
Size Quantity Screw Type
C M2.0*3.0 NI 1
To Next Page
Loading...
