Acer Aspire 5755G - Palmrest Assembly Installation

3-28 Machine Maintenance Procedures
Palmrest Assembly Installation 0
1. Align palmrest assembly (E) with the keyboard as shown in Figure 3-27.
Figure 3-27. Palmrest Assembly
2. Connect touchpad FFC (C) to touchpad module connector (D) (Figure 3-26).
3. Put palmrest onto lower cover. (Figure 3-25)
4. Install and secure two (2) screws (B) to lower cover. (Figure 3-23)
5. Install and secure six (6) screws (A) to lower cover. (Figure 3-22)
6. Install HDD module.
7. Install base door.
ID Size Quantity Screw Type
A M2.45x8.0 8
B M2.5x5.0 2
E
E
SG_JV51_HR.book Page 28 Friday, July 8, 2011 5:58 PM
HTTP://MYCOMP.SU/ - Maintenance and Service Guide,Service Manual,Motherboard Schematics for Laptop/notebook
РЕМОНТ НОУТБУКОВ. Запчасти и комплектующие для ноутбука. Схемы, сервис мануалы, инструкции по разборке ноутбука.
ВОССТАНОВЛЕНИЕ ДАННЫХ. г. Санкт-Петербург, Тел.(812)951-37-99, Тел.8-921-951-37-99,ICQ:573812745, service@it-lux.ru