System Utilities 2-15
DOS Flash Utility 0
Perform the following to use the DOS Flash Utility:
1. Press F2 during boot to enter Setup Menu.
2. Select Boot Menu to modify boot priority order.
3. Move USB HDD to position 1. (Refer to Boot menu)
Figure 2-12. Changing BIOS Boot Priority Order
4. Copy FLASH.BAT to USB HDD.
5. Insert USB HDD and reboot computer.
6. Execute FLASH.BAT to update BIOS. (Figure 2-14)
Figure 2-13. Executing FLASH.BAT
InsydeH20 Setup Utility Rev. 3.5
Information Main Security Boot Exit
Item Specific Help
Boot priority order:
USe <> or <> to
select a device, then
press <F5> to move it
down the list, or <F6>
to move it up the list.
Press <Esc> to escape
the menu.
1. HDD: WDC WD 2500BPVT-22ZEST0
2. ATAPI CDROM: MATSHITADVD-RAM UJ890AS
3. USB FDD:
4. Network Boot: LEGACY PCI DEVICE
5. USB HDD: xxxx USB
6. USB CDROM:
F1 Help Select Item F5/F6 Change Values F9 Setup Default
ESC Exit Select Menu Enter Select>SubMenu F10 Save and Exit
SG_JV51_HR.book Page 15 Friday, July 8, 2011 5:58 PM
HTTP://MYCOMP.SU/ - Maintenance and Service Guide,Service Manual,Motherboard Schematics for Laptop/notebook
РЕМОНТ НОУТБУКОВ. Запчасти и комплектующие для ноутбука. Схемы, сервис мануалы, инструкции по разборке ноутбука.
ВОССТАНОВЛЕНИЕ ДАННЫХ. г. Санкт-Петербург, Тел.(812)951-37-99, Тел.8-921-951-37-99,ICQ:573812745, service@it-lux.ru
To Next Page
Loading...
